╔═══════════════════════════════════════════════════════════════════╗
║                                                                   ║
║   ✅ INTERNAL DRIVE RECOVERY COMPLETE                            ║
║                                                                   ║
╚═══════════════════════════════════════════════════════════════════╝

Your internal NVMe drive has been fully configured and is ready to 
boot independently!

═══════════════════════════════════════════════════════════════════

📋 WHAT WAS DONE:

1. ✅ Fixed /etc/crypttab to use internal-vg/home explicitly
2. ✅ Updated initramfs with new LUKS configuration  
3. ✅ Reinstalled GRUB bootloader on internal NVMe
4. ✅ Created Ubuntu EFI boot entry (Boot0001)
5. ✅ Set boot order: Ubuntu FIRST in boot priority

═══════════════════════════════════════════════════════════════════

🚀 NEXT STEPS:

STEP 1: REBOOT THE SYSTEM
   $ sudo reboot
   
   After reboot, the system will use the internal drive's home 
   partition instead of the external one.

STEP 2: VERIFY CONFIGURATION
   $ cd ~/Nextcloud/entwicklung/Werkzeuge/backup_to_external_m.2
   $ ./verify_internal_config.sh
   
   All 7 checks should pass after reboot.

STEP 3: TEST FULL INDEPENDENCE (Optional but Recommended)
   $ sudo shutdown -h now
   
   Then:
   - Physically disconnect the external USB M.2 drive
   - Power on the system
   - System should boot completely from internal NVMe
   - You should be able to log in and access all your data

STEP 4: RECONNECT EXTERNAL & CREATE BACKUP
   After verifying internal drive works:
   - Reconnect external drive
   - Run the backup script:
     $ sudo ./lvm_block_backup.sh
   
   This will create a block-level clone of internal → external

═══════════════════════════════════════════════════════════════════

⚠️  ABOUT THE "RESET SYSTEM" MESSAGE:

The message you see BEFORE GRUB is from Lenovo BIOS, not GRUB.

To clear it:
• Press F1 during boot → Enter BIOS → Save & Exit (F10)
  OR
• After 1-2 clean boots, it should disappear automatically

This is just a BIOS notification - your system IS bootable!

═══════════════════════════════════════════════════════════════════

📚 DOCUMENTATION:

All changes are documented in:
• INTERNAL_DRIVE_RECOVERY.md - Complete technical details
• BOOT_FIX_SUMMARY.md - GRUB bootloader fixes
• verify_internal_config.sh - Configuration verification

═══════════════════════════════════════════════════════════════════

🎯 CURRENT STATUS:

✅ Internal drive fully configured
✅ Boot order corrected (Ubuntu first)  
✅ GRUB properly installed
⏳ PENDING: Reboot to activate home partition change

═══════════════════════════════════════════════════════════════════

💾 BACKUP STRATEGY:

Once verified, you'll have:

INTERNAL NVMe (nvme0n1) = PRIMARY SYSTEM
- Daily use
- Main operating system
- All your data

EXTERNAL M.2 (sda) = BACKUP/EMERGENCY BOOT
- Block-level clone of internal
- Bootable rescue system
- Emergency access if internal fails

═══════════════════════════════════════════════════════════════════

Ready to reboot? Run:
   sudo reboot

═══════════════════════════════════════════════════════════════════