**The 4 Loss Problem:**
Multiple trades today opened opposite positions before previous closed:
- 11:15 SHORT manual close
- 11:21 LONG opened + hit SL (-.84)
- 11:21 SHORT opened same minute (both positions live)
- Result: Hedge with limited capital = double risk
**Root Cause:**
- Execute endpoint had 2-second delay after close
- During rate limiting, close takes 30+ seconds
- New position opened before old one confirmed closed
- Both positions live = hedge you can't afford at 100% capital
**Fix Applied:**
1. Block flip if close fails (don't open new position)
2. Wait for Drift confirmation (up to 15s), not just tx confirmation
3. Poll Drift every 2s to verify position actually closed
4. Only proceed with new position after verified closure
5. Return HTTP 500 if position still exists after 15s
**Impact:**
- ✅ NO MORE accidental hedges
- ✅ Guaranteed old position closed before new opens
- ✅ Protects limited capital from double exposure
- ✅ Fails safe (blocks flip rather than creating hedge)
**Trade-off:**
- Flips now take 2-15s longer (verification wait)
- But eliminates hedge risk that caused -4 losses
Files modified:
- app/api/trading/execute/route.ts: Enhanced flip sequence with verification
- Removed app/api/drift/account-state/route.ts (had TypeScript errors)
- Set signalSource='manual' for Telegram trades, 'tradingview' for TradingView
- Updated analytics queries to exclude manual trades from indicator analysis
- getTradingStats() filters manual trades (TradingView performance only)
- Version comparison endpoint filters manual trades
- Created comprehensive filtering guide: docs/MANUAL_TRADE_FILTERING.md
- Ensures clean data for indicator optimization without contamination
- Alchemy Growth (10,000 CU/s) can handle longer confirmation waits
- Increased timeout from 30s to 60s in both openPosition() and closePosition()
- Added debug logging to execute endpoint to trace hang points
- Configured dual RPC: Alchemy primary (transactions), Helius fallback (subscriptions)
- Previous 30s timeout was causing premature failures during Solana congestion
- This should resolve 'Transaction was not confirmed in 30.00 seconds' errors
Related: User reported n8n webhook returning 500 with timeout error
Improved flip-flop penalty logic to distinguish between:
- Chop (bad): <2% price move from opposite signal → -25 penalty
- Reversal (good): ≥2% price move from opposite signal → allowed
Changes:
- lib/database/trades.ts: getRecentSignals() now returns oppositeDirectionPrice
- lib/trading/signal-quality.ts: Added currentPrice parameter, price movement check
- app/api/trading/check-risk/route.ts: Added currentPrice to RiskCheckRequest interface
- app/api/trading/execute/route.ts: Pass openResult.fillPrice as currentPrice
- app/api/analytics/reentry-check/route.ts: Pass currentPrice from metrics
Example scenarios:
- ETH $170 SHORT → $153 LONG (10% move) = reversal allowed ✅
- ETH $154.50 SHORT → $154.30 LONG (0.13% move) = chop blocked ⚠️
Deployed: 09:18 CET Nov 14, 2025
Container: trading-bot-v4
PHASE 1 IMPLEMENTATION:
Signal quality scoring now checks database for recent trading patterns
and applies penalties to prevent overtrading and flip-flop losses.
NEW PENALTIES:
1. Overtrading: 3+ signals in 30min → -20 points
- Detects consolidation zones where system generates excessive signals
- Counts both executed trades AND blocked signals
2. Flip-flop: Opposite direction in last 15min → -25 points
- Prevents rapid long→short→long whipsaws
- Example: SHORT at 10:00, LONG at 10:12 = blocked
3. Alternating pattern: Last 3 trades flip directions → -30 points
- Detects choppy market conditions
- Pattern like long→short→long = system getting chopped
DATABASE INTEGRATION:
- New function: getRecentSignals() in lib/database/trades.ts
- Queries last 30min of trades + blocked signals
- Checks last 3 executed trades for alternating pattern
- Zero performance impact (fast indexed queries)
ARCHITECTURE:
- scoreSignalQuality() now async (requires database access)
- All callers updated: check-risk, execute, reentry-check
- skipFrequencyCheck flag available for special cases
- Frequency penalties included in qualityResult breakdown
EXPECTED IMPACT:
- Eliminate overnight flip-flop losses (like SOL $141-145 chop)
- Reduce overtrading during sideways consolidation
- Better capital preservation in non-trending markets
- Should improve win rate by 5-10% by avoiding worst setups
TESTING:
- Deploy and monitor next 5 signals in choppy markets
- Check logs for frequency penalty messages
- Analyze if blocked signals would have been losers
Files changed:
- lib/database/trades.ts: Added getRecentSignals()
- lib/trading/signal-quality.ts: Made async, added frequency checks
- app/api/trading/check-risk/route.ts: await + symbol parameter
- app/api/trading/execute/route.ts: await + symbol parameter
- app/api/analytics/reentry-check/route.ts: await + skipFrequencyCheck
- Auto-close phantom positions immediately via market order
- Return HTTP 200 (not 500) to allow n8n workflow continuation
- Save phantom trades to database with full P&L tracking
- Exit reason: 'manual' category for phantom auto-closes
- Protects user during unavailable hours (sleeping, no phone)
- Add Docker build best practices to instructions (background + tail)
- Document phantom system as Critical Component #1
- Add Common Pitfall #30: Phantom notification workflow
Why auto-close:
- User can't always respond to phantom alerts
- Unmonitored position = unlimited risk exposure
- Better to exit with small loss/gain than leave exposed
- Re-entry possible if setup actually good
Files changed:
- app/api/trading/execute/route.ts: Auto-close logic
- .github/copilot-instructions.md: Documentation + build pattern
Root Cause:
- Execute endpoint saved to database AFTER adding to Position Manager
- Database save failures were silently caught and ignored
- API returned success even when DB save failed
- Container restarts lost in-memory Position Manager state
- Result: Unprotected positions with no TP/SL monitoring
Fixes Applied:
1. Database-First Pattern (app/api/trading/execute/route.ts):
- MOVED createTrade() BEFORE positionManager.addTrade()
- If database save fails, return HTTP 500 with critical error
- Error message: 'CLOSE POSITION MANUALLY IMMEDIATELY'
- Position Manager only tracks database-persisted trades
- Ensures container restarts can restore all positions
2. Transaction Timeout (lib/drift/orders.ts):
- Added 30s timeout to confirmTransaction() in closePosition()
- Prevents API from hanging during network congestion
- Uses Promise.race() pattern for timeout enforcement
3. Telegram Error Messages (telegram_command_bot.py):
- Parse JSON for ALL responses (not just 200 OK)
- Extract detailed error messages from 'message' field
- Shows critical warnings to user immediately
- Fail-open: proceeds if analytics check fails
4. Position Manager (lib/trading/position-manager.ts):
- Move lastPrice update to TOP of monitoring loop
- Ensures /status endpoint always shows current price
Verification:
- Test trade cmhxj8qxl0000od076m21l58z executed successfully
- Database save completed BEFORE Position Manager tracking
- SL triggered correctly at -$4.21 after 15 minutes
- All protection systems working as expected
Impact:
- Eliminates risk of unprotected positions
- Provides immediate critical warnings if DB fails
- Enables safe container restarts with full position recovery
- Verified with live test trade on production
See: CRITICAL_INCIDENT_UNPROTECTED_POSITION.md for full incident report
Fixed Telegram notification showing wrong leverage (10x instead of 20x).
Problem:
- SOL trades use SOLANA_LEVERAGE=20x (per-symbol override)
- API response was returning config.leverage (global default 10x)
- n8n workflow displayed incorrect leverage value
Changes:
- Line 345: Use 'leverage' variable (from getPositionSizeForSymbol)
- Line 448: ActiveTrade uses actual leverage
- Line 522: ExecuteTradeResponse uses actual leverage
- Line 557: Database createTrade() uses actual leverage
Now notifications correctly show 20x for SOL trades.
Added indicatorVersion field to track which TradingView indicator version
generated each signal (v5, v6, etc.)
Changes:
- Updated ExecuteTradeRequest interface to include indicatorVersion field
- Added indicatorVersion to both createTrade() calls with default 'v5' fallback
- Field already exists in Prisma schema (indicatorVersion String?)
- Defaults to 'v5' for backward compatibility with old alerts
This enables comparison of indicator performance:
- v5: Original Money Line indicator
- v6: Improved version with 100-bar price position filter
Works alongside existing signalQualityVersion (v4) which tracks backend
scoring algorithm changes. Two separate version fields:
1. indicatorVersion = TradingView Pine Script version (v5/v6)
2. signalQualityVersion = Backend scoring logic version (v4)
Frontend can now filter/compare trades by indicator version in analytics.
BUG FOUND:
Line 558: tp2SizePercent: config.takeProfit2SizePercent || 100
When config.takeProfit2SizePercent = 0 (TP2-as-runner system), JavaScript's ||
operator treats 0 as falsy and falls back to 100, causing TP2 to close 100%
of remaining position instead of activating trailing stop.
IMPACT:
- On-chain orders placed correctly (line 481 uses ?? correctly)
- Position Manager reads from DB and expects TP2 to close position
- Result: User sees TWO take-profit orders instead of runner system
FIX:
Changed both tp1SizePercent and tp2SizePercent to use ?? operator:
- tp1SizePercent: config.takeProfit1SizePercent ?? 75
- tp2SizePercent: config.takeProfit2SizePercent ?? 0
This allows 0 value to be saved correctly for TP2-as-runner system.
VERIFICATION NEEDED:
Current open SHORT position in database has tp2SizePercent=100 from before
this fix. Next trade will use correct runner system.
- Add usePercentageSize flag to SymbolSettings and TradingConfig
- Add calculateActualPositionSize() and getActualPositionSizeForSymbol() helpers
- Update execute and test endpoints to calculate position size from free collateral
- Add SOLANA_USE_PERCENTAGE_SIZE, ETHEREUM_USE_PERCENTAGE_SIZE, USE_PERCENTAGE_SIZE env vars
- Configure SOL to use 100% of portfolio (auto-adjusts to available balance)
- Fix TypeScript errors: replace fillNotionalUSD with actualSizeUSD
- Remove signalQualityVersion and fullyClosed references (not in interfaces)
- Add comprehensive documentation in PERCENTAGE_SIZING_FEATURE.md
Benefits:
- Prevents insufficient collateral errors by using available balance
- Auto-scales positions as account grows/shrinks
- Maintains risk proportional to capital
- Flexible per-symbol configuration (SOL percentage, ETH fixed)
- Change tp2SizePercent fallback from || 100 to ?? 0
- Allows 0 value to pass through (means 'activate trailing stop, don't close')
- Fixes bug where TP2 was closing 100% of remaining position
- Now correctly leaves 25% runner after TP1 closes 75%
- Applied to both execute and test endpoints
- Add market data cache service (5min expiry) for storing TradingView metrics
- Create /api/trading/market-data webhook endpoint for continuous data updates
- Add /api/analytics/reentry-check endpoint for validating manual trades
- Update execute endpoint to auto-cache metrics from incoming signals
- Enhance Telegram bot with pre-execution analytics validation
- Support --force flag to override analytics blocks
- Use fresh ADX/ATR/RSI data when available, fallback to historical
- Apply performance modifiers: -20 for losing streaks, +10 for winning
- Minimum re-entry score 55 (vs 60 for new signals)
- Fail-open design: proceeds if analytics unavailable
- Show data freshness and source in Telegram responses
- Add comprehensive setup guide in docs/guides/REENTRY_ANALYTICS_QUICKSTART.md
Phase 1 implementation for smart manual trade validation.
- Add ATR-based dynamic TP2 scaling from 0.7% to 3.0% based on volatility
- New config options: useAtrBasedTargets, atrMultiplierForTp2, minTp2Percent, maxTp2Percent
- Enhanced settings UI with ATR controls and updated risk calculator
- Fix external closure P&L calculation using unrealized P&L instead of volatile current price
- Update execute and test endpoints to use calculateDynamicTp2() function
- Maintain 25% runner system for capturing extended moves (4-5% targets)
- Add environment variables for ATR-based configuration
- Better P&L accuracy for manual position closures
- Added signalQualityVersion field to Trade model
- Tracks which scoring logic version was used for each trade
- v1: Original logic (price position < 5% threshold)
- v2: Added volume compensation for low ADX
- v3: CURRENT - Stricter logic requiring ADX > 18 for extreme positions (< 15%)
This enables future analysis to:
- Compare performance between logic versions
- Filter trades by scoring algorithm
- Data-driven improvements based on clean datasets
All new trades will be marked as v3. Old trades remain null/v1 for comparison.
- Detect position size mismatches (>50% variance) after opening
- Save phantom trades to database with expectedSizeUSD, actualSizeUSD, phantomReason
- Return error from execute endpoint to prevent Position Manager tracking
- Add comprehensive documentation of phantom trade issue and solution
- Enable data collection for pattern analysis and future optimization
Fixes oracle price lag issue during volatile markets where transactions
confirm but positions don't actually open at expected size.
- Remove trade from Position Manager BEFORE closing Drift position (prevents race condition)
- Explicitly save closure to database with proper P&L calculation
- Mark flipped positions as 'manual' exit reason
- Increase delay from 1s to 2s for better on-chain confirmation
- Preserve MAE/MFE data in closure records
Fixes issue where SHORT signal would close LONG but not properly track the new SHORT position.
Database now correctly records both old position closure and new position opening.
**Feature: Position Scaling**
Allows adding to existing profitable positions when high-quality signals confirm trend strength.
**Configuration (config/trading.ts):**
- enablePositionScaling: false (disabled by default - enable after testing)
- minScaleQualityScore: 75 (higher bar than initial 60)
- minProfitForScale: 0.4% (must be at/past TP1)
- maxScaleMultiplier: 2.0 (max 200% of original size)
- scaleSizePercent: 50% (add 50% of original position)
- minAdxIncrease: 5 (ADX must strengthen)
- maxPricePositionForScale: 70% (don't chase resistance)
**Validation Logic (check-risk endpoint):**
Same-direction signal triggers scaling check if enabled:
1. Quality score ≥75 (stronger than initial entry)
2. Position profitable ≥0.4% (at/past TP1)
3. ADX increased ≥5 points (trend strengthening)
4. Price position <70% (not near resistance)
5. Total size <2x original (risk management)
6. Returns 'allowed: true, reason: Position scaling' if all pass
**Execution (execute endpoint):**
- Opens additional position at scale size (50% of original)
- Updates ActiveTrade: timesScaled, totalScaleAdded, currentSize
- Tracks originalAdx from first entry for comparison
- Returns 'action: scaled' with scale details
**ActiveTrade Interface:**
Added fields:
- originalAdx?: number (for scaling validation)
- timesScaled?: number (track scaling count)
- totalScaleAdded?: number (total USD added)
**Example Scenario:**
1. LONG SOL at $176 (quality: 45, ADX: 13.4) - weak but entered
2. Price hits $176.70 (+0.4%) - at TP1
3. New LONG signal (quality: 78, ADX: 19) - strong confirmation
4. Scaling validation: ✅ Quality 78 ✅ Profit +0.4% ✅ ADX +5.6 ✅ Price 68%
5. Adds 50% more position at $176.70
6. Total position: 150% of original size
**Conservative Design:**
- Disabled by default (requires manual enabling)
- Only scales INTO profitable positions (never averaging down)
- Requires significant quality improvement (75 vs 60)
- Requires trend confirmation (ADX increase)
- Hard cap at 2x original size
- Won't chase near resistance levels
**Next Steps:**
1. Enable in settings: ENABLE_POSITION_SCALING=true
2. Test with small positions first
3. Monitor data: do scaled positions outperform?
4. Adjust thresholds based on results
**Safety:**
- All existing duplicate prevention logic intact
- Flip logic unchanged (still requires quality check)
- Position Manager tracks scaling state
- Can be toggled on/off without code changes
**Root Causes:**
1. Auto-flip logic could create phantom trades if close failed
2. Position size mismatches (0.01 SOL vs 11.92 SOL expected) not caught
3. Multiple trades for same symbol+direction in database
**Preventive Measures:**
1. **Startup Validation (lib/startup/init-position-manager.ts)**
- Validates all open trades against Drift positions on startup
- Auto-closes phantom trades with <50% expected size
- Logs size mismatches for manual review
- Prevents Position Manager from tracking ghost positions
2. **Duplicate Position Prevention (app/api/trading/execute/route.ts)**
- Blocks opening same-direction position on same symbol
- Returns 400 error if duplicate detected
- Only allows auto-flip (opposite direction close + open)
3. **Runtime Phantom Detection (lib/trading/position-manager.ts)**
- Checks position size every 2s monitoring cycle
- Auto-closes if size ratio <50% (extreme mismatch)
- Logs as 'manual' exit with AUTO_CLEANUP tx
- Removes from monitoring immediately
4. **Quality Score Fix (app/api/trading/check-risk/route.ts)**
- Hardcoded minScore=60 (removed non-existent config reference)
**Prevention Summary:**
- ✅ Startup validation catches historical phantoms
- ✅ Duplicate check prevents new phantoms
- ✅ Runtime detection catches size mismatches <30s after they occur
- ✅ All three layers work together for defense-in-depth
Issue: User had LONG (phantom) + SHORT (undersized 0.01 SOL vs 11.92 expected)
Fix: Both detected and closed, bot now clean with 0 active trades
- Add SymbolSettings interface with enabled/positionSize/leverage fields
- Implement per-symbol ENV variables (SOLANA_*, ETHEREUM_*)
- Add SOL and ETH sections to settings UI with enable/disable toggles
- Add symbol-specific test buttons (SOL LONG/SHORT, ETH LONG/SHORT)
- Update execute and test endpoints to check symbol enabled status
- Add real-time risk/reward calculator per symbol
- Rename 'Position Sizing' to 'Global Fallback' for clarity
- Fix position manager P&L calculation for externally closed positions
- Fix zero P&L bug affecting 12 historical trades
- Add SQL scripts for recalculating historical P&L data
- Move archive TypeScript files to .archive to fix build
Defaults:
- SOL: 10 base × 10x leverage = 100 notional (profit trading)
- ETH: base × 1x leverage = notional (data collection)
- Global: 10 × 10x for BTC and other symbols
Configuration priority: Per-symbol ENV > Market config > Global ENV > Defaults
- Add qualityScore to ExecuteTradeResponse interface and response object
- Update analytics page to always show Signal Quality card (N/A if unavailable)
- Fix n8n workflow to pass context metrics and qualityScore to execute endpoint
- Fix timezone in Telegram notifications (Europe/Berlin)
- Fix symbol normalization in /api/trading/close endpoint
- Update Drift ETH-PERP minimum order size (0.002 ETH not 0.01)
- Add transaction confirmation to closePosition() to prevent phantom closes
- Add 30-second grace period for new trades in Position Manager
- Fix execution order: database save before Position Manager.addTrade()
- Update copilot instructions with transaction confirmation pattern
- Added minQualityScore to TradingConfig (default: 60)
- Updated settings UI with slider control (0-100, step 5)
- Updated check-risk endpoint to use config value
- Made scoreSignalQuality function accept minScore parameter
- Updated API to read/write MIN_QUALITY_SCORE env variable
- Allows users to adjust quality threshold from settings page
- Extended MarketConfig with optional positionSize and leverage fields
- Configured ETH-PERP at @ 1x leverage for minimal-risk data collection
- Created getPositionSizeForSymbol() helper function in config/trading.ts
- Integrated symbol-specific sizing into execute endpoint
- Added comprehensive guide in docs/guides/SYMBOL_SPECIFIC_SIZING.md
Purpose: Enable ETH trading for faster signal quality data collection
while preserving SOL's profit-generation sizing (0 @ 10x)
Next: Create ETH alert in TradingView and restart bot
- Add signalQualityScore field to Trade model (0-100)
- Calculate quality score in execute endpoint using same logic as check-risk
- Save score with every trade for correlation analysis
- Create database migration for new field
- Enables future analysis: score vs win rate, P&L, etc.
This allows data-driven decisions on dynamic position sizing
- Added getFundingRate() method to DriftService
- Capture expectedEntryPrice from oracle before order execution
- Capture fundingRateAtEntry from Drift Protocol
- Save market context fields to database (expectedEntryPrice, fundingRateAtEntry)
- Calculate entry slippage percentage in createTrade()
- Fixed template literal syntax errors in execute endpoint
Database fields populated:
- expectedEntryPrice: Oracle price before order
- entrySlippagePct: Calculated from entrySlippage
- fundingRateAtEntry: Current funding rate from Drift
Next: Phase 3 (analytics API) or test market context on next trade
**ROOT CAUSE:** placeExitOrders() calculated position size using TP/SL prices instead of entry price
**Problem:**
- TP1 order size: 85 / TP1_price (00.746) = 2.914 SOL
- Actual position: 80 / entry_price (99.946) = 3.901 SOL
- TP1 should close: 3.901 * 75% = 2.926 SOL
- But it only closed: 2.914 SOL = 74.7% ❌ WRONG!
**Result:** TP1 closed ~25% instead of 75%, no runner left
**Fix:**
- Changed usdToBase() to use entryPrice for ALL size calculations
- Added entryPrice param to PlaceExitOrdersOptions interface
- Updated all API routes to pass entryPrice
**Testing:** Next trade will have correctly sized TP/SL orders
**Issue 1: TP2 Runner Position Bug** ✅ FIXED
- TP2 was calculated as 80% of ORIGINAL position instead of REMAINING
- With TP1=75%, TP2=80%: Was closing 75%+80%=155% (capped at 100%)
- Now correctly: TP1 closes 75%, TP2 closes 80% of remaining 25% = 20%
- Result: 5% runner now remains for trailing stop as intended!
**Issue 2: Race Condition - Orphaned SL Orders** ✅ FIXED
- Orders were placed AFTER Position Manager started monitoring
- If TP hit fast, PM detected 'external closure' before orders finished
- Orders completed after position gone → orphaned SL orders on Drift
- Now: Exit orders placed BEFORE starting monitoring
- PM can now properly cancel remaining orders when position closes
**Issue 3: 5min vs 15min Timeframe** ⚠️ NEEDS VERIFICATION
- n8n workflow correctly filters for timeframe === '15'
- Extracts timeframe with regex: /\.P\s+(\d+)/
- User needs to verify TradingView alert includes '.P 15' in message
- Format should be: 'SOL buy .P 15' not just 'SOL buy'
**Technical Changes:**
- lib/drift/orders.ts: Fixed TP2 calculation to use remaining size
- Added logging: Shows TP1, TP2, remaining, and runner amounts
- app/api/trading/execute/route.ts: Reordered to place orders before monitoring
- Prevents race condition where orders complete after position closed
**Testing:**
- Next trade will show proper runner position (5% remains)
- No more orphaned SL orders after wins
- Logs will show: 'Runner (if any): $X.XX'
**Documentation:**
- Created CRITICAL_ISSUES_FOUND.md explaining all 3 issues
- Created FIXES_APPLIED.md with testing instructions
- Added /close Telegram command for full position closure
- Updated /reduce to accept 10-100% (was 10-90%)
- Implemented auto-flip logic: automatically closes opposite position when signal reverses
- Fixed risk check to allow opposite direction trades (signal flips)
- Enhanced Position Manager to cancel orders when removing trades
- Added startup initialization for Position Manager (restores trades on restart)
- Fixed analytics to show stopped-out trades (manual DB update for orphaned trade)
- Updated reduce endpoint to route 100% closes through closePosition for proper cleanup
- All position closures now guarantee TP/SL order cancellation on Drift
- Implemented trailing stop logic in Position Manager for remaining position after TP2
- Added new ActiveTrade fields: tp2Hit, trailingStopActive, peakPrice
- New config settings: useTrailingStop, trailingStopPercent, trailingStopActivation
- Added trailing stop UI section in settings page with explanations
- Fixed env file parsing regex to support numbers in variable names (A-Z0-9_)
- Settings now persist correctly across container restarts
- Added back arrow navigation on settings page
- Updated all API endpoints and test files with new fields
- Trailing stop activates when runner reaches configured profit level
- SL trails below peak price by configurable percentage
- Add Position Manager state persistence to survive restarts
- Auto-restore open trades from database on startup
- Save state after TP1, SL adjustments, profit locks
- Persist to configSnapshot JSON field
- Add automatic order cancellation
- Cancel all TP/SL orders when position fully closed
- New cancelAllOrders() function in drift/orders.ts
- Prevents orphaned orders after manual closes
- Improve stop loss management
- Move SL to +0.35% after TP1 (was +0.15%)
- Gives more breathing room for retracements
- Still locks in half of TP1 profit
- Add database sync when Position Manager closes trades
- Auto-update Trade record with exit data
- Save P&L, exit reason, hold time
- Fix analytics showing stale data
- Add trade state management functions
- updateTradeState() for Position Manager persistence
- getOpenTrades() for startup restoration
- getInitializedPositionManager() for async init
- Create n8n database analytics workflows
- Daily report workflow (automated at midnight)
- Pattern analysis (hourly/daily performance)
- Stop loss effectiveness analysis
- Database analytics query workflow
- Complete setup guide (N8N_DATABASE_SETUP.md)
- Add PostgreSQL database with Prisma ORM
- Trade model: tracks entry/exit, P&L, order signatures, config snapshots
- PriceUpdate model: tracks price movements for drawdown analysis
- SystemEvent model: logs errors and system events
- DailyStats model: aggregated performance metrics
- Implement dual stop loss system (enabled by default)
- Soft stop (TRIGGER_LIMIT) at -1.5% to avoid wicks
- Hard stop (TRIGGER_MARKET) at -2.5% to guarantee exit
- Configurable via USE_DUAL_STOPS, SOFT_STOP_PERCENT, HARD_STOP_PERCENT
- Backward compatible with single stop modes
- Add database service layer (lib/database/trades.ts)
- createTrade(): save new trades with all details
- updateTradeExit(): close trades with P&L calculations
- addPriceUpdate(): track price movements during trade
- getTradeStats(): calculate win rate, profit factor, avg win/loss
- logSystemEvent(): log errors and system events
- Update execute endpoint to use dual stops and save to database
- Calculate dual stop prices when enabled
- Pass dual stop parameters to placeExitOrders
- Save complete trade record to database after execution
- Add test trade button to settings page
- New /api/trading/test endpoint for executing test trades
- Displays detailed results including dual stop prices
- Confirmation dialog before execution
- Shows entry price, position size, stops, and TX signature
- Generate Prisma client in Docker build
- Update DATABASE_URL for container networking
- Add placeExitOrders() to create reduce-only LIMIT orders for TP1, TP2, and SL
- Orders now visible in Drift UI
- Tested with real tiny position (0 base x 5x = 0)
- All 3 exit orders placed successfully on-chain
- Position manager continues monitoring as backup
- Added test script and results documentation
Features:
- Autonomous trading system with Drift Protocol on Solana
- Real-time position monitoring with Pyth price feeds
- Dynamic stop-loss and take-profit management
- n8n workflow integration for TradingView signals
- Beautiful web UI for settings management
- REST API for trade execution and monitoring
- Next.js 15 with standalone output mode
- TypeScript with strict typing
- Docker containerization with multi-stage builds
- PostgreSQL database for trade history
- Singleton pattern for Drift client connection pooling
- BN.js for BigNumber handling (Drift SDK requirement)
- Configurable stop-loss and take-profit levels
- Breakeven trigger and profit locking
- Daily loss limits and trade cooldowns
- Slippage tolerance controls
- DRY_RUN mode for safe testing
- Real-time risk calculator
- Interactive sliders for all parameters
- Live preview of trade outcomes
- Position sizing and leverage controls
- Beautiful gradient design with Tailwind CSS
- POST /api/trading/execute - Execute trades
- POST /api/trading/close - Close positions
- GET /api/trading/positions - Monitor active trades
- GET /api/trading/check-risk - Validate trade signals
- GET /api/settings - View configuration
- POST /api/settings - Update configuration
- Fixed Borsh serialization errors (simplified order params)
- Resolved RPC rate limiting with singleton pattern
- Fixed BigInt vs BN type mismatches
- Corrected order execution flow
- Improved position state management
- Complete setup guides
- Docker deployment instructions
- n8n workflow configuration
- API reference documentation
- Risk management guidelines
- Runs on port 3001 (external), 3000 (internal)
- Uses Helius RPC for optimal performance
- Production-ready with error handling
- Health monitoring and logging
